ARRI SkyPanel S60-C | S60-RP LED Softlight | Tungsten | Daylight (Blue/Silver, Manual/Pole Operated, Edison | Schuko | Bare Ends)

  • $5,890.00
    Unit price per 
  • Save $660
Shipping calculated at checkout.


Key Features

  • Panel Surface Area: 25.4 x 11.8"
  • 110° - 115° Beam Spread, Rail Mount Adapter
  • Color Temperature from 2800-10,000K
  • Full Gamut Color Mixing
  • Manual Yoke | Pole Operated
  • 0-100% Dimming, DMX Control

In the Box


ARRI SkyPanel S60-C Softlight

  • ARRI SkyPanel S60-C LED Softlight with Manual | Pole Operated Yoke (Blue/Silver, Edison | Schuko | Bare Ends)
  • Power Supply
  • ARRI PSU Rail Mount Adapter for SkyPanel S30 and S60
  • Standard Diffuser
  • Limited 1-Year Warranty

ARRI SkyPanel S60-RP Tungsten | Daylight

  • ARRI SkyPanel S60-RP Tungsten | Daylight LED Remote Phosphor with Manual | Pole Operated Yoke (Blue/Silver, Edison | Schuko | Bare Ends)
  • Power Supply
  • Remote Phosphor (3200K | 5600K)
  • Limited 1-Year Warranty

ARRI SkyPanel S60-C Softlight

ARRI continues to broaden their LED line and reaffirm their commitment to accurate color rendering with the introduction of the SkyPanel S60-C LED Softlight. Supported by a steel yoke, the panel surface area measures 25.4 x 11.8" and employs interchangeable thermoplastic diffusers that range from Lite to Heavy to soften the light and wrap its output around your subject. The SkyPort outputs the equivalent of a 2000W tungsten soft light while drawing a maximum of only 450W.

Using technology originally designed for the L7-C Fresnel, the SkyPanel S60-C can be adjusted to output a warm 2800K to icy blue 10,000K light and also uses the full RGB+W color gamut with hue and saturation control for fine adjustments. Full Minusgreen to Full Plusgreen is also possible, so if you're lighting for blue or greenscreen, you can simply dial in your chosen color. This wide degree of control is responsible for a high CRI of 95 and a rating of 90 with the newer TLCI standard. All of these functions as well as 0-100% dimming can be adjusted locally with the SkyPanel's onboard controller or remotely via DMX or a LAN. Besides inputs and outputs appropriate to these functions, the light also has a USB-A port for downloading firmware upgrades from a thumb drive or any PC/Mac.

The SkyPanel S60-C can be used worldwide thanks to its included 90-250 VAC power supply, but it can also use optional 23-36 VDC batteries when mains power is unavailable. Besides the power supply, the light comes with a Junior (1 1/8") pin and a standard diffuser.

Specs


ARRI SkyPanel S60-RP Tungsten

ARRI continues to broaden their LED line and reaffirm their commitment to accurate color rendering with the introduction of the SkyPanel S60-RP Tungsten LED Remote Phosphor Softlight. Supported by a steel yoke, the light's surface area measures 25.4 x 11.8" and employs interchangeable phosphor panels to achieve a specific Kelvin temperature instead of adding phosphors to blue LEDs. The powerful native LEDs then excite the phosphor panel that's mounted like a filter in front of the fixture. This method not only uses less electronics resulting in a lower price point, but delivers a color rendition that approaches current definitions of "perfection" and is 10% brighter than its color tuneable SC60-C counterpart which has an output equivalent to a 2,000W tungsten softlight. Both versions of the light draw only 450W.

This rendition of the light ships with a 3200K panel with an impressively high CRI of 94 but optional 2700K, 4300K, 5600K and 6500K phosphor panels with CRIs of 93, 97, 98 and 98 respectively are available, as well as a Chroma Green panel. Dimming from 0-100% dimming can adjusted locally with the SkyPanel's onboard controller or remotely via DMX or over an LAN network. Besides inputs and outputs appropriate to these functions, the light has a USB type-A port for downloading firmware upgrades from a thumb drive, PC, or Mac.

The SkyPanel S60-RP can be used worldwide, thanks to its included 90-250 VAC power supply but it can also use optional 23-36 VDC batteries when mains power is unavailable. Besides the power supply, the light comes with a Junior (1-1/8") pin.

Specs



ARRI SkyPanel S60-RP Daylight

ARRI continues to broaden their LED line and reaffirm their commitment to accurate color rendering with the introduction of the SkyPanel S60-RP Daylight LED Remote Phosphor Softlight. Supported by a steel yoke, the light's surface area measures 25.4 x 11.8" and employs interchangeable phosphor panels to achieve a specific Kelvin temperature instead of adding phosphors to blue LEDs. The powerful native LEDs then excite the phosphor panel that's mounted like a filter in front of the fixture. This method not only uses less electronics resulting in a lower price point, but delivers a color rendition that approaches current definitions of "perfection" and is 10% brighter than its color tuneable SC60-C counterpart which has an output equivalent to a 2,000W tungsten softlight. Both versions of the light draw only 450W.

This rendition of the light ships with a 5600K panel with an impressively high CRI of 98 but optional 2700K, 3200K, 4300K and 6500K phosphor panels with CRIs of 93, 94, 97 and 98 respectively are available, as well as a Chroma Green panel. Dimming from 0-100% dimming can adjusted locally with the SkyPanel's onboard controller or remotely via DMX or over an LAN network. Besides inputs and outputs appropriate to these functions, the light has a USB type-A port for downloading firmware upgrades from a thumb drive, PC, or Mac.

The SkyPanel S60-RP can be used worldwide, thanks to its included 90-250 VAC power supply but it can also use optional 23-36 VDC batteries when mains power is unavailable. Besides the power supply, the light comes with a Junior (1-1/8") pin.

Specs



We Also Recommend