Launch a wide spectrum of brightness and color into your studio with the ARRI Orbiter LED Light, a tuneable color light system with a powerful color engine and versatile, changeable optics. This black | blue/silver model features 15°| 30°| 60° Open Face optics | Large Dome Optics, an Schuko | Edison oe Bare Ends power connector, and features a manually operated yoke mount.
Sporting a processor four times faster than the Skypanel, ARRI's 190-LED Spectra system features a wide range of color features allowing you to create an enormous range of colors with its six-color light engine including red, green, blue, amber, cyan, and lime LEDs. Sporting a high CRI of 98 and a TLCI of 95, it features a 2000 to 20,000K color temperature range to match just about any lighting situation, and it also features 100 to 0% dimming with smooth, continuous adjustment. The light also features multiple sensors, including a smart color sensor mode to sense the surrounding light and adjust its output for fine color accuracy, a 3-axis accelerometer that senses pan, tilt, and roll movements, an ambient light sensor to keep your display readable, heat sensors to keep the light cool, and even a magnetometer to orient your light within its geography.
The Orbiter features a highly portable design that can change its optics with a breeze using ARRI's Quick Lighting Mount (QLM), a bayonet-style connection similar to a camera lens mount. Available optics include 15, 30, and 60° open face optics that produce a directional beam; 15, 25, and 35° projection optics that produce a sharp, focused beam with evenly distributed color; and small, medium, and large domes that provide a large area of soft light. The light can also be used with separately available light banks, barndoors, honeycombs, and other light-shaping accessories with the appropriate adapter.
Using ARRI's Lighting Operating System (LiOS), you can control all color modes, effects, and lighting grids right from the built-in control panel. LiOS features eight color modes such as CCT, HSO, RGBACL, Gel select, X/Y coordinates, source matching, effects, and a custom mode that allows you to save over 240 favorites which can be applied to a DMX or interface. It also has three operational modes—high color rendering, high output, and low noise—for your preferred mode performance. The light's bright color control panel is also removable and can be used remotely with the included 15' extension cable. Interfaces include 5-pin DMX in and out, two LAN ports, two USB Type-A ports, a USB Type-C port, and an SD slot for future upgrades. It also features a sync input for future applications that will sync with your camera.
The light is powered by its internal power supply using a powerCON AC cable, and it can also be powered from a DC source using a 3-pin XLR connector. The light is weatherproof and can resist dust and water splashes. Its redesigned mounting points secure the included yoke for positioning with a +/-90° tilt, and the yoke features a standard 1 1/8" Junior pin mounting point.