ARRI M90 9K HMI High-Speed Kit
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great

ARRI M90 9K HMI High-Speed Kit

Available:Preorder
$29,700.00
Successful pre-order.Thanks for contacting us!
ARRI M90 HMI Head

With power that positions it between the M40 and the ARRIMAX 18/12, the M90 HMI Lamp Head from ARRI employs faceted MAX Reflector Technology that focuses from 15 to 49 degrees, combining the best qualities of a Fresnel and PAR fixture to produce an output similar to a 12,000W light from a 9,000W lamp.The IP23 weather-resistant M90 ships with a yoke with a 1-1/8" Junior mounting pin. Tilt lock levers on both sides of the light firmly secure the weighty 88 lb fixture.

The M90 requires a ballast for use and 2 are available. Both units employ CCL (Compensation of Cable Losses) to maintain power with long cable runs independent of their length. They also feature a power-saving Active Line Filter (ALF) and built-in DMX for remote operation from a console. The standard EB 6/9 operates at 50, 60 and 75 Hz while the 1000 Hz high speed version allows up to 1,000 flicker-free frames per second.

  • 5-Year extended warranty
  • Light output nearly matches a 12K PAR (with lens)
  • As small and lightweight as a 6K PAR
  • Can also be used with 6,000W (120V nominal) lamps and ballasts
  • Tilt locks on both sides support heavy accessories
  • Easy maintenance
  • Weather resistant IP23
  • Suitable for high frame rate images
  • ARRI Head to Ballast Cable for Daylight 6000, Arrisun 60, Arri-X 60 and Compact HMI 6000 - 50'

    A 50' long head to ballast cable that connects the Arrisun 60, Daylight 6KW and Compact 6KW HMI lights to their ballasts.

    ARRI EB MAX 6/9 Ballast

    The ARRI EB MAX 6/9 Ballast is intended for use with select ARRI lamp heads. This ballast has ALF (Active Line Filter), which provides a higher power factor resulting in more efficient power use. This is accomplished by shifting the voltage and current waveforms in phase and minimizing harmonics and spikes. ALF also minimizes the current carried back on the neutral leg of the power systems. Cable Loss Compensation, which prevents power loss in head-to-ballast cables up to 300' long, is also featured. The ballast has a low-noise switch and a power factor of 0.98.

    This ballast has substantial DMX control. In addition to On/Off and dimming, both operation mode and frequency can be controlled remotely. For ease of use, indicators on the ballast's front panel display the lamp wattage, DMX channel, operation mode, and selected lamp frequency. High speed shooters will appreciate features such as Active Line Filter (ALF), and AutoScan, ensuring optimum light and image quality for high-speed recordings up to 1000 fps.

    • Cable Loss Compensation prevents power loss in head-to-ballast cables up to 300' long
    • Active Line Filter (ALF) increases power efficiency
    • DMX 512 for precision remote control
    • Low-noise switch
    Additional Features
    • Automatic Lamp Recognition
    • Automatic Lamphead Recognition
    • Dimming
    • AutoScan
    Compatibility
    • M-Series M90
    • Daylight 6000
    • Compact 6000
    • ARRISUN 6000
    • X60
    ARRI 4-Leaf Barndoor Set for M90 Lamp Head

    The ARRI 4-Leaf Barndoor Set for M90 Lamp Head is a light shaping tool that allows you to direct the light where you want it and keep it away from areas you don't. It's also useful for containing spill light from the fixture.

    ARRI M90 HMI Head

    With power that positions it between the M40 and the ARRIMAX 18/12, the M90 HMI Lamp Head from ARRI employs faceted MAX Reflector Technology that focuses from 15 to 49 degrees, combining the best qualities of a Fresnel and PAR fixture to produce an output similar to a 12,000W light from a 9,000W lamp.The IP23 weather-resistant M90 ships with a yoke with a 1-1/8" Junior mounting pin. Tilt lock levers on both sides of the light firmly secure the weighty 88 lb fixture.

    The M90 requires a ballast for use and 2 are available. Both units employ CCL (Compensation of Cable Losses) to maintain power with long cable runs independent of their length. They also feature a power-saving Active Line Filter (ALF) and built-in DMX for remote operation from a console. The standard EB 6/9 operates at 50, 60 and 75 Hz while the 1000 Hz high speed version allows up to 1,000 flicker-free frames per second.

  • 5-Year extended warranty
  • Light output nearly matches a 12K PAR (with lens)
  • As small and lightweight as a 6K PAR
  • Can also be used with 6,000W (120V nominal) lamps and ballasts
  • Tilt locks on both sides support heavy accessories
  • Easy maintenance
  • Weather resistant IP23
  • Suitable for high frame rate images
  • ARRI Head to Ballast Cable for Daylight 6000, Arrisun 60, Arri-X 60 and Compact HMI 6000 - 50'

    A 50' long head to ballast cable that connects the Arrisun 60, Daylight 6KW and Compact 6KW HMI lights to their ballasts.

    ARRI EB MAX 6/9 Ballast

    The ARRI EB MAX 6/9 Ballast is intended for use with select ARRI lamp heads. This ballast has ALF (Active Line Filter), which provides a higher power factor resulting in more efficient power use. This is accomplished by shifting the voltage and current waveforms in phase and minimizing harmonics and spikes. ALF also minimizes the current carried back on the neutral leg of the power systems. Cable Loss Compensation, which prevents power loss in head-to-ballast cables up to 300' long, is also featured. The ballast has a low-noise switch and a power factor of 0.98.

    This ballast has substantial DMX control. In addition to On/Off and dimming, both operation mode and frequency can be controlled remotely. For ease of use, indicators on the ballast's front panel display the lamp wattage, DMX channel, operation mode, and selected lamp frequency. High speed shooters will appreciate features such as Active Line Filter (ALF), and AutoScan, ensuring optimum light and image quality for high-speed recordings up to 1000 fps.

    • Cable Loss Compensation prevents power loss in head-to-ballast cables up to 300' long
    • Active Line Filter (ALF) increases power efficiency
    • DMX 512 for precision remote control
    • Low-noise switch
    Additional Features
    • Automatic Lamp Recognition
    • Automatic Lamphead Recognition
    • Dimming
    • AutoScan
    Compatibility
    • M-Series M90
    • Daylight 6000
    • Compact 6000
    • ARRISUN 6000
    • X60
    ARRI 4-Leaf Barndoor Set for M90 Lamp Head

    The ARRI 4-Leaf Barndoor Set for M90 Lamp Head is a light shaping tool that allows you to direct the light where you want it and keep it away from areas you don't. It's also useful for containing spill light from the fixture.

    Key Specs
    Supported Wattage 6000 to 9000 W
    Base Type Mogul Bi-Post G38
    Fixture Mount 1-1/8" Stud
    AC Input Power 120 to 230 VAC, 50 / 60 Hz
    Lamp
    Included Lamps No
    Supported Wattage 6000 to 9000 W
    Photometrics 16°
    473,790 fc / 5,100,000 Lux at 3.3' / 1 m*
    4738 fc / 51,000 Lux at 32.81' / 10 m
    1185 fc / 12,750 Lux at 65.62' / 20 m
    527 fc / 5670 Lux at 98.43' / 30 m
    30°
    134,240 fc / 1,445,000 Lux at 3.3' / 1 m*
    1342 fc / 14,450 Lux at 32.81' / 10 m
    335 fc / 3610 Lux at 65.62' / 20 m
    149 fc / 1600 Lux at 98.43' / 30 m
    49°
    70,418 fc / 758,000 Lux at 3.3' / 1 m*
    704 fc / 7580 Lux at 32.81' / 10 m
    177 fc / 1900 Lux at 65.62' / 20 m
    78 fc / 840 Lux at 82' / 25 m

    *Standardized Measurement Calculated Internally Based on Closest Distance
    Base Type Mogul Bi-Post G38
    Compatibility
    Fixture Mount 1-1/8" Stud
    Lens No
    Power
    AC Input Power 120 to 230 VAC, 50 / 60 Hz
    General
    Certifications CB, CE, cNRTLus, GS
    *as per Manufacturer
    IP Rating IP23
    Environmental Protection Advertised as Dust Resistant/Water Resistant
    *Manufacturer Testing: IP23
    Dimensions 28.1 x 28.2 x 37.3" / 71 x 71.6 x 94.7 cm
    Weight 88 lb / 40 kg
    Packaging Info
    Package Weight 83 lb
    Box Dimensions (LxWxH) 36 x 32 x 31"

    ARRI Head To Ballast Cable For Daylight 6000, Arrisun 60, Arri-X 60 And Compact HMI 6000 - 50' Specs

    Packaging Info
    Package Weight 38 lb
    Box Dimensions (LxWxH) 21 x 21 x 4.5"

    ARRI EB MAX 6/9 Ballast Specs

    Lamp Power 6000/9000 W
    Input Voltage 180-250 VAC, 50/60 Hz 1, N, PE
    Line Power: 11,200 VA (Max.)
    Power Factor: cos Ф ≈ 0.98 due to Active Line Filter (ALF)
    Current Nominal Current: 56-44 A
    Square Wave, 75 Hz (Standard Mode)
    300 Hz: Adjustable 270-360 Hz
    1000 Hz: Adjustable 900-1200 Hz
    Dimming 50-100%
    Plug US / North America
    Lamp Head Connector: Veam
    Operating Temperature -4-113°F / -20-45°C
    Plug Bare Ends
    Typical Light Ripple < 3%
    DMX DMX512
    Indicators On/Off
    Protective Earth
    Lamp On
    Over-Temperature
    Output Mode (Frequency)
    Remote/DMX
    Detected Lamp Power
    IP Rating IP20
    Dimensions 14.1 x 10.4 x 17.7" / 358 x 263 x 450 mm
    Weight Approximately 61.7 lb / 28 kg
    Packaging Info
    Package Weight 69 lb
    Box Dimensions (LxWxH) 26.5 x 16.75 x 14.88"

    ARRI 4-Leaf Barndoor Set For M90 Lamp Head Specs

    Item Type 4-Leaf Barndoors
    Light Compatibility 23" Diameter Mount: For ARRI M90 HMI
    Packaging Info
    Package Weight 9.2 lb
    Box Dimensions (LxWxH) 28 x 25 x 0.5"
    • ARRI M90 HMI Head
    • ARRI Head to Ballast Cable for Daylight 6000, Arrisun 60, Arri-X 60 and Compact HMI 6000 - 50'
    • ARRI EB MAX 6/9 Ballast
    • ARRI 4-Leaf Barndoor Set for M90 Lamp Head