ARRI M40 HMI Head Only Or 2.5/4kW Ballast Kit L1.37400.B L0.0006580 L0.0006581
- 2,500 or 4,000W Lamps
- 1 1/8" Stand Mount
- Lens-less MAX Technology
- 30% Brighter than ARRISUN 40/25
In the Box
|Light Fixture Only||Light & Ballast Kit||Light & EB MAX Ballast Kit|
ARRI M40 HMI Head
The ARRI M40 HMI Head is a location work horse. Whenever you need to punch light through a silk or bounce light off a reflective surface, an M40 is the ultimate answer. At the design stage, the interaction of lamp, reflector and converter lens was taken into consideration and computer simulated, resulting in unmatched performance. The M40 can be fitted with a 2,500 or 4,000W single-ended HMI lamp, making it a very versatile lighting fixture.
The M40 uses lensless MAX technology to combine the characteristics of a Fresnel and PAR source. With a focus range of 18 - 52°, normally only achieved with supplementary lenses, the M40 outperforms the brightness of its predecessor, the ARRISUN 40/25 by approximately 30% while throwing an even beam with sharp shadows. Innovations include CCL, which compensates for power loss when using long cables and Cross Cooling which separates the electronics from the lamp housing, thus ensuring greater longevity of the head and lamp.
Structurally, the M40 employs a robust, tubular steel yoke and disc brakes to safely lock down the head when tilting. The head weighs in 6.6 lb lighter than its predecessor due to intelligent design, while it's still able to use all of the ARRISUN 40/25's accessories. Don't worry about moist locations either; the M40 has an IP23 weather-resistant rating.
Steel Yoke with two Disc Brakes
ARRI Head to Ballast Cable - 50' (15.2m)
This is an Arri 50' Head to Ballast Cable that connects the Arri Compact HMI 2.5K, 4K, Arrisun & Arri-X 40/25 HMI lights to their ballasts.
ARRI 4-Leaf Barndoor Set for ARRI 2K Studio Fresnel
This is an ARRI 4-Leaf Barndoor Set for the ST5 5000W Studio Fresnel. Barndoors attach to the front of a light and are used to restrict light from areas of a set. ARRI barndoors are heat resistant and rotatable.
ARRI Electronic 2,500/4,000W Ballast with ALF and DMX (120-240 VAC)
This 120-240 VAC ARRI Electronic 2,500/4,000W Ballast with ALF and DMX is a multi-voltage, dual wattage electronic ballast with Active Line Filter for Power Factor Correction. ALF provides a higher Power Factor resulting in more efficient power use. This is accomplished by shifting the voltage and current waveforms in phase and minimizing harmonics and spikes. ALF also minimizes the current carried back on the neutral leg of the power systems.
- Multi-voltage, quiet operation
- Dimmable, operates with 2 or 4K setting
ARRI EB MAX 2.5/4K High-Speed Electronic Ballast with AFL, CCL, DMX & AutoScan (US)
Designed for ARRI True Blue, M-Series, and Compact/Theater lamp heads, the EB MAX 2.5/4K High-Speed Electronic Ballast will safely power these fixtures while also providing numerous advanced performance features. It offers AutoScan for optimizing light quality, even when working at frequencies up to 1200 Hz. Other built-in features include an Active Line Filter and Compensation of Cable Losses, ensuring that light quality is consistent and the power supplied is appropriate, even over longer distances. DMX control from a console is provided as well, allowing for remote dimming from 50 to 100%, on/off controls, and the ability to adjust the operation mode and frequency. Additionally, the ballast has a low-frequency setting for minimizing noise and an array of LED status indicators for quickly viewing settings.
- ARRI M40 HMI Head #L0.0006580
- ARRI Head to Ballast Cable #L2.0005082
- ARRI 4-Leaf Barndoor #L2.41200.0
- ARRI Electronic 2,500/4,000W Ballast #L2.76676UL
ARRI EB MAX 2.5/4K High-Speed Electronic Ballast #L0.0006581
We Also Recommend
ARRI SkyPanel S60-C | S60-RP LED Softlight | Tungsten | Daylight (Blue/Silver, Manual/Pole Operated, Edison | Schuko | Bare Ends)