ARRI L7-C LED Fresnel Kit (Silver/Blue, Stand Mount, Edison | Schuko)

  • $3,499.99
    Unit price per 
Shipping calculated at checkout.


Key Features

  • 1 x L7-C LED Fresnel
  • 1 x Power Cord with Switch: 23'
  • LE2: 25% Brighter than previous L7-C
  • Beam Angle: 15-50 Degrees

In the Box

    • Limited 1-Year Warranty
  • ARRI Power Cord with Switch for L-Series Fresnels (23')
    • Limited 1-Year Warranty

ARRI L7-C LED Fresnel Kit (Silver/Blue, Stand Mount, Edison | Schuko)

The Silver/Blue, Manual Mount L7-C LE2 Color LED Fresnel is part of ARRI's continuing effort to replace traditional Fresnels with powerful LED versions that offer unprecedented color control. The L7-C LE2 shares many characteristics with its predecessor, but the most obvious improvement is a 25% boost in power, increasing the light's tungsten equivalency from 750W to 1000W. This stand/manual mount version has a yoke with a 1-1/8" Junior pin.

The key characteristic of any Fresnel is flood-to-spot capability, and the L7-C LE2 meets and exceeds expectations with an impressive beam angle of 15-50°. There's no learning curve when swapping out L7-C LE2 fixtures for fixtures with standard Fresnels. In fact, you're not going to be moving them around or juggling scrims in high places thanks to the 100 - 0% on-board dimming.

The L7-C LE2 is a "fully tune-able" white light source too, allowing you to match existing fixtures from a warm 2800K to ice-blue 10,000K. The on-board controller allows manual intensity control as well as color temperature and +/- green. Specific color shades and skin tones can be matched through the full gamut color mixing feature. All functions can be controlled via DMX, an ideal feature for broadcast studios. The hybrid cooling system allows for cooling both actively (with a fan) or passively (without a fan) for times when the set needs to be dead quiet. The L7-C LE2's 1000W equivalent output draws only 160W during normal operation, making possible a savings of a 75% over similar output tungsten lights. And low heat means lower AC bills in the studio. You can actually run 9x L7-C LE2's from a 20A, 120VAC outlet as opposed to two 1000W or three 650W standard fixtures. The L7-C requires a separately-purchased power cable.

Attributes and Benefits

  • L7-C LE2s with Light Engine 2 are 25% brighter than previous versions
  • Fully tuneable from 2800 - 10,000K
  • Plus/Minusgreen correction
  • Vibrant color selection (RGB+W color gamut)
  • Hue and saturation control
  • High color rendering
  • Low power consumption (160W nominal)
  • Fully dimmable
  • True Fresnel lens light characteristics from LEDs
  • Onboard DMX In and Out
  • RDM implementation
  • USB Mini connection for firmware updates
  • Available in blue/silver and black
  • Fan mode selection

Photometrics

@ 3200K
  
Spot 15°:
  • 9.8' (3.0 m): 6689 lux / 621 fc
  • 16.4' (5.0 m): 2408 lux / 224 fc
  • 23' (7.0 m): 1229 lux / 114 fc
  • 29.5' (9.0 m): 743 lux / 69 fc
Medium: 30°:
  • 9.8' (3.0 m): 1980 lux / 184 fc
  • 16.4' (5.0 m): 713 lux / 66 fc
  • 23' (7.0 m): 364 lux / 34 fc
  • 29.5' (9.0 m): 220 lux / 20 fc
Flood: 50°
  • 9.8' (3.0 m): 807 lux / 75 fc
  • 16.4' (5.0 m): 290 lux / 27 fc
  • 23' (7.0 m): 148 lux / 14 fc
  • 29.5' (9.0 m): 90 lux / 8 fc
@ 5600K
   
Spot 15°:
  • 9.8' (3.0 m): 7511 lux / 698 fc
  • 16.4' (5.0 m): 2704 lux / 251 fc
  • 23' (7.0 m): 1380 lux / 128 fc
  • 29.5' (9.0 m): 835 lux / 78 fc
Medium: 30°:
  • 9.8' (3.0 m): 2210 lux / 205 fc
  • 16.4' (5.0 m): 796 lux / 74 fc
  • 23' (7.0 m): 406 lux / 38 fc
  • 29.5' (9.0 m): 246 lux / 23 fc
Flood: 50°
  • 9.8' (3.0 m): 898 lux / 83 fc
  • 16.4' (5.0 m): 323 lux / 30 fc
  • 23' (7.0 m): 165 lux / 15 fc
  • 29.5' (9.0 m): 100 lux / 9 fc


ARRI Power Cord with Switch for L-Series Fresnels (23')

This 23' long Power Cord with Switch for L-Series Fresnels from ARRI provides mains power to the L5, L7, and L10 series LED fresnel lights. It features a powerCon True 1 connector and a heavy-duty inline power switch.



ARRI L7-C LED Fresnel Kit (Silver/Blue, Stand Mount, Edison | Schuko) Specs

Light Fixture
Beam Angle 15 to 50°
Color Temperature 2800 to 10,000K ± 100K (with 200K Shift over Lifetime)
Color Accuracy Standard CRI 94 at 3200K
CRI 94 at 5600K
TLCI 90 at 3200K
TLCI 90 at 6500K
Cooling System Fan/Passive Combo
Dimming Yes, 0 to 100% (Continuous)
Fixture Weight 18 lb / 8.16 kg
Connectors
DMX Connector 5-Pin XLR
Service Connector Mini-USB
Lens
Lens Type Fresnel
Mounting
Yoke Mount TVMP/ Hex Bolt
Fixture Mount 1-1/8" Stud
Yoke
Yoke Type Yoke/Bracket
Remote Operation
Remote Control Type DMX
Power
AC Input Power 100 to 250 VAC, 50 / 60 Hz
Power Source AC Adapter
Max Power Consumption 220 W
Physical
IP Rating IP20


ARRI Power Cord With Switch For L-Series Fresnels (23') Specs

General
Connector 1 NEMA 5-15 Male
Connector 2 PowerCon Female
Cable Length 22.97' / 7 m

We Also Recommend

ARRI SkyPanel S60-C | S60-RP LED Softlight | Tungsten | Daylight (Blue/Silver, Manual/Pole Operated, Edison | Schuko | Bare Ends) - Studio AMG

ARRI SkyPanel S60-C | S60-RP LED Softlight | Tungsten | Daylight (Blue/Silver, Manual/Pole Operated, Edison | Schuko | Bare Ends)

Sale price $4,399.99
ARRI M40 HMI Head Only Or 2.5/4kW Ballast Kit L1.37400.B L0.0006580 L0.0006581 - Studio AMG

ARRI M40 HMI Head Only Or 2.5/4kW Ballast Kit L1.37400.B L0.0006580 L0.0006581

Sale price $7,499.99
ARRI M18 HMI 1800W Lamphead (110/220 VAC) L1.37600.B - Studio AMG

ARRI M18 HMI 1800W Lamphead (110/220 VAC) L1.37600.B

Sale price $4,399.99
ARRI DoPchoice SnapGrid 40° For SkyPanel S30 | S60 | S120 | S360 - Studio AMG

ARRI DoPchoice SnapGrid 40° For SkyPanel S30 | S60 | S120 | S360

Sale price $299.99
ARRI 4-Leaf Barndoor Set for ARRI T5 & ST2 Studio Fresnel - Studio AMG

ARRI 4-Leaf Barndoor Set for ARRI T5 & ST2 Studio Fresnel

Sale price $149.99
x