ARRI EB MAX 6/9 Ballast (US, EU)
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great
-13%
ARRI EB MAX 6/9 Ballast (US, EU) - Studio AMG
ARRI EB MAX 6/9 Ballast (US, EU) - Studio AMG
ARRI EB MAX 6/9 Ballast (US, EU) - Studio AMG

ARRI EB MAX 6/9 Ballast (US, EU)

Available:Preorder
$16,999.00 $19,030.00
Successful pre-order.Thanks for contacting us!

The ARRI EB MAX 6/9 Ballast is intended for use with select ARRI lamp heads. This ballast has ALF (Active Line Filter), which provides a higher power factor resulting in more efficient power use. This is accomplished by shifting the voltage and current waveforms in phase and minimizing harmonics and spikes. ALF also minimizes the current carried back on the neutral leg of the power systems. Cable Loss Compensation, which prevents power loss in head-to-ballast cables up to 300' long, is also featured. The ballast has a low-noise switch and a power factor of 0.98.

This ballast has substantial DMX control. In addition to On/Off and dimming, both operation mode and frequency can be controlled remotely. For ease of use, indicators on the ballast's front panel display the lamp wattage, DMX channel, operation mode, and selected lamp frequency. High speed shooters will appreciate features such as Active Line Filter (ALF), and AutoScan, ensuring optimum light and image quality for high-speed recordings up to 1000 fps.

  • Cable Loss Compensation prevents power loss in head-to-ballast cables up to 300' long
  • Active Line Filter (ALF) increases power efficiency
  • DMX 512 for precision remote control
  • Low-noise switch
Additional Features
  • Automatic Lamp Recognition
  • Automatic Lamphead Recognition
  • Dimming
  • AutoScan
Compatibility
  • M-Series M90
  • Daylight 6000
  • Compact 6000
  • ARRISUN 6000
  • X60

The ARRI EB MAX 6/9 Ballast is intended for use with select ARRI lamp heads. This ballast has ALF (Active Line Filter), which provides a higher power factor resulting in more efficient power use. This is accomplished by shifting the voltage and current waveforms in phase and minimizing harmonics and spikes. ALF also minimizes the current carried back on the neutral leg of the power systems. Cable Loss Compensation, which prevents power loss in head-to-ballast cables up to 300' long, is also featured. The ballast has a low-noise switch and a power factor of 0.98.

This ballast has substantial DMX control. In addition to On/Off and dimming, both operation mode and frequency can be controlled remotely. For ease of use, indicators on the ballast's front panel display the lamp wattage, DMX channel, operation mode, and selected lamp frequency. High speed shooters will appreciate features such as Active Line Filter (ALF), and AutoScan, ensuring optimum light and image quality for high-speed recordings up to 1000 fps.

  • Cable Loss Compensation prevents power loss in head-to-ballast cables up to 300' long
  • Active Line Filter (ALF) increases power efficiency
  • DMX 512 for precision remote control
  • Low-noise switch
Additional Features
  • Automatic Lamp Recognition
  • Automatic Lamphead Recognition
  • Dimming
  • AutoScan
Compatibility
  • M-Series M90
  • Daylight 6000
  • Compact 6000
  • ARRISUN 6000
  • X60
Lamp Power 6000/9000 W
Input Voltage 180-250 VAC, 50/60 Hz 1, N, PE
Line Power: 11,200 VA (Max.)
Power Factor: cos Ф ≈ 0.98 due to Active Line Filter (ALF)
Current Nominal Current: 56-44 A
Square Wave, 75 Hz (Standard Mode)
300 Hz: Adjustable 270-360 Hz
1000 Hz: Adjustable 900-1200 Hz
Dimming 50-100%
Plug US / North America
Lamp Head Connector: Veam
Operating Temperature -4-113°F / -20-45°C
Plug Bare Ends
Typical Light Ripple < 3%
DMX DMX512
Indicators On/Off
Protective Earth
Lamp On
Over-Temperature
Output Mode (Frequency)
Remote/DMX
Detected Lamp Power
IP Rating IP20
Dimensions 14.1 x 10.4 x 17.7" / 358 x 263 x 450 mm
Weight Approximately 61.7 lb / 28 kg
  • ARRI EB MAX 6/9 Ballast
  • Limited 1-Year Warranty
x