ARRI Arrimax 18/12Kw HMI PAR (220 VAC) or Ballast Kit
- Lens-less MAX Technology
- 15° to 50° continuous beam angle: standard reflector
- 8° to 15° beam angle: spot reflector
- Easy re-lamping
- ARRI Dual Pin Width support (GX51/GX38)
- IP Rating IP23
- Suitable for high frame rate images
- Works with motorized yoke "BigBee"
In the Box
|Fixture Only||Ballast Kit|
ARRI Arrimax 18/12Kw HMI PAR (220 VAC)
The design of the Arrimax 18/12Kw HMI PAR fixture provides an optimum choice for productions requiring maximum light output. Combining the variable beam spread of a Fresnel and the light output of a PAR, the Arrimax uses a unique reflector concept for beam control which eliminates the need for spread lenses.
The optical system with its 580mm (22.8") diameter specular, flatted reflector is adjustable and provides continuous focus from 15 - 50°. Because the Arrimax does not require a set of spread lenses, the shadow quality is sharper and easily cut.
Although exact specifications are not available, this fixture will provide well over 3,000 footcandles from a distance of 100', when fitted with a 12,000 watt HMI lamp.
Optional Light Shapers
Hanging or Stand Mount
Sturdy, Sure Lamp Mount
Optional Electronic Ballast
- Interlock micro-switch on front door for safely disconnecting all power-load connections.
- Protective class I, protective rate IP 23.
- Arri eXtreme cooling system
ARRI Head to Ballast Cable for ARRI 18/12Kw HMI Fresnel and ARRIMAX 18/12kW PAR - 50'
This ARRI 50' Head to Ballast Cable for ARRI 18/12Kw HMI Fresnel and ARRIMAX 18/12kW connects the ARRI 18/12Kw HMI Frensel and ARRIMAX 18/12kW PAR to its ballast.
ARRI EB MAX 12/18 Ballast
The ARRI EB MAX 12/18 Ballast is intended for use with select ARRI fresnel lamp heads. This ballast has ALF (Active Line Filter), which provides a higher power factor resulting in more efficient power use. This is accomplished by shifting the voltage and current waveforms in phase and minimizing harmonics and spikes. ALF also minimizes the current carried back on the neutral leg of the power systems. Cable Loss Compensation, which prevents power loss in head-to-ballast cables up to 300' long, is also featured. The ballast has a low-noise switch and a power factor of 0.99.
This ballast has substantial DMX control. In addition to On/Off and dimming, both operation mode and frequency can be controlled remotely. For ease of use, indicators on the ballast's front panel display the lamp wattage, DMX channel, operation mode, and selected lamp frequency. High speed shooters will appreciate features such as Active Line Filter (ALF), and AutoScan, ensuring optimum light and image quality for high-speed recordings up to 1000 fps.
- Cable Loss Compensation prevents power loss in head-to-ballast cables up to 300' long
- Active Line Filter (ALF) increases power efficiency
- DMX 512 for precision remote control
- Low-noise switch
- M-Series ARRIMAX 12/18
- ARRI Daylight 18/12
- ARRI Compact 12,000
- ARRISUN 120
ARRI 4 Leaf Barndoor Set for Arri T24
This is an Arri 4 Leaf Barndoor Set for the huge T24 Fresnel. Barndoors attach to the front of a light and are used to restrict light from areas of a set. They have either four or eight leaves that can be adjusted. Arri barndoors are heat resistant and rotatable.
We Also Recommend
ARRI SkyPanel S60-C | S60-RP LED Softlight | Tungsten | Daylight (Blue/Silver, Manual/Pole Operated, Edison | Schuko | Bare Ends)
ARRI M40 HMI Head Only Or 2.5/4kW Ballast Kit L1.37400.B L0.0006580 L0.0006581