Amimon CONNEX Wireless HD Video Link for UAVs AMN0811MS_01

  • $1,999.99
    Unit price per 
Shipping calculated at checkout.

Key Features

  • 1080p60 Video Monitoring from the Air
  • HDMI Input and Output
  • Up to 3300' Line-of-Sight Range
  • Less Than 1 ms Latency

Whereas traditional 5.8G analog systems limit you to SD resolution, with the CONNEX Wireless HD Video Link for UAVs from Amimon , you will be able to view a live, near-zero latency, feed from a UAV-mounted camera at up to 1080p60 resolution. Suitable for monitoring, FPV, and gimbal operation, the system features a range of up to 3300' line-of-sight (depending on conditions). It incorporates an S.BUS relay so that gimbal controls for S.BUS-compatible gimbals can be relayed to back to the aircraft (gimbal remote available separately), and can display OSD data from MAVLINK telemetry modules (telemetry system available separately). The video transmission in encrypted to help prevent eavesdropping. The transmitter can link to up to four receivers, for example allowing the pilot and camera operator to each have their own monitor or FPV goggles (additional receivers available separately).

Cables and mounting hardware are included. The air unit is designed to power from the flight battery, while the ground unit includes an AC adapter. The ground unit can also power from a separately available 7 to 19 VDC source for added flexibility in the field.

Plug & Fly

CONNEX is designed to setup and get you working out of the box - no complicated binding procedures here

Full HD Resolution

Unlike analog systems, which limit you to SD resolution, the digital CONNEXT system provides support for up to 1080p60

Virtually no Latency

Featuring less than 1 ms of latency, the CONNEX does not buffer or hold your video, so that you can see and control what's happening live. Use CONNEX video to help you fly, aim the camera, or operate the gimbal

5.8G ISM Band Operation

CONNEX uses the 5.1 to 5.8 GHz frequency range to avoid interfering with aircraft control systems, which are usually 2.4 GHz. Automatic Frequency Selection (AFS) will choose the best available channel to be used, and will move seamlessly to an alternative channel on-the-fly if needed

Gimbal Control

CONNEX is able to relay the control signal for an S.BUS-based gimbal mounted on the UAV. Using Futaba S.BUS from the remote control, you can use CONNEX to simultaneously get video from the drone and control the gimbal on it

OSD (On-Screen Display) Overlay

CONNEX On-Screen-Display (OSD) is a great way to see your flight status. The OSD shows both information about your wireless link status, and MAVLINK-based telemetry from your UAV flight controller

  • Note: MAVLINK telemetry system required to supply OSD data (available separately)

Encrypted Transmission

CONNEX employs AES128 for the video encryption and RSA1024 for key exchange to help ensure no one unauthorized is able to intercept your video feed

UPC: 814114020010

In the Box

  • Amimon CONNEX Wireless HD Video Link for UAVs
  • Air Unit (Transmitter)
  • Amimon Connex Wireless HD Video Link Receiver
  • 2 x Tx Cable Antennas
  • Aircraft Antenna Mounting Hardware
  • Micro to Mini HDMI Cable (19.7")
  • 5-Pin JST to S-BUS Female (19.7")
  • 6-Pin JST Female to XT-60 Male Telemetry Cable (19.7")
  • 4-Pin JST to XT-60 Male Air Unit Power Cable (19.7")
  • Micro USB Cable
  • Mounting Plate for Air Unit

We Also Recommend

Amimon CONNEX Wireless Mini HD Video Link for UAVs AMN1811PB_01 - Studio AMG

Amimon CONNEX Wireless Mini HD Video Link for UAVs AMN1811PB_01

Regular price $1,699.00