Teradek Beam Transmitter & Receiver Set with Gold-Mount
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great
-25%
Teradek Beam Transmitter & Receiver Set with Gold-Mount  Teradek  Wireless Video Transmission System Studio AMG.
Teradek Beam Transmitter & Receiver Set with Gold-Mount  Teradek  Wireless Video Transmission System Studio AMG.

Teradek Beam Transmitter & Receiver Set with Gold-Mount

Available:Preorder
$4,990.00 $6,690.00
Successful pre-order.Thanks for contacting us!

Key Features

  • Wireless Video & Audio Transmission
  • Supports Resolutions Up to 1080p60
  • 2500 ft Distance with 70ms-80ms Latency
  • Uses License-Free 5 GHz Frequency

In the Box

  • Teradek Beam Transmitter & Receiver Set with V-Mount
  • 3 x Transmitter Antennas
  • 3 x Receiver Antennas
  • Receiver Power Adapter
  • Pelican Case
  • Limited 1-Year Warranty

The Teradek Beam system transmits up to 1080p60 video with audio for up to 2500 ft over the license-free 5 GHz frequency. Latency is only 70ms-80ms, which comes out to approximately 2 frames. This set includes one transmitter with a 3G-SDI input and loop output, and one receiver with a 3G-SDI output. The transmitter offers a V-Mount male plate on one side and female on the other and is meant to be sandwiched in between your camera and battery. Both units also offer RJ45 ports supporting wired LAN (Local Area Network) transfer and bidirectional serial control.

Video is encoded in the H.264 codec and delivered at 30 Mbps bit rate and 50 Mbps over a LAN. The system uses RTSP streaming and also includes an MPEG-TS streaming license that you can switch over to via the OLED menu display.

The transmitter has multicast capability in both 5 GHz and LAN modes, supporting up to four receivers simultaneously. Both the transmitter and receiver also feature mic inputs and headphone outputs allowing two-way communication. Both units also offer 1/4"-20 mounting threads on the bottom.

  • Transmits up 1080p60 for up to 2500 ft over the 5 GHz frequency
  • 70ms-80ms latency (approximately 2 frames)
  • 3G-SDI input and loop output / 3G-SDI output
  • Transmitter features a V-Mount plate on both sides
  • RJ45 ports supporting wired LAN transfer
  • RJ45 ports for bidirectional serial control
  • H.264 encoding
  • 30 Mbps bit rate over 5 GHz and 50 Mbps over LAN
  • RTSP and MPEG-TS streaming
  • OLED menu display
  • Mic and headphone connections allowing two way communication
  • Dedicated bidirectional IFB channel
  • Multicast capable, supporting up to 4 receivers

Key Features

  • Wireless Video & Audio Transmission
  • Supports Resolutions Up to 1080p60
  • 2500 ft Distance with 70ms-80ms Latency
  • Uses License-Free 5 GHz Frequency

In the Box

  • Teradek Beam Transmitter & Receiver Set with V-Mount
  • 3 x Transmitter Antennas
  • 3 x Receiver Antennas
  • Receiver Power Adapter
  • Pelican Case
  • Limited 1-Year Warranty

The Teradek Beam system transmits up to 1080p60 video with audio for up to 2500 ft over the license-free 5 GHz frequency. Latency is only 70ms-80ms, which comes out to approximately 2 frames. This set includes one transmitter with a 3G-SDI input and loop output, and one receiver with a 3G-SDI output. The transmitter offers a V-Mount male plate on one side and female on the other and is meant to be sandwiched in between your camera and battery. Both units also offer RJ45 ports supporting wired LAN (Local Area Network) transfer and bidirectional serial control.

Video is encoded in the H.264 codec and delivered at 30 Mbps bit rate and 50 Mbps over a LAN. The system uses RTSP streaming and also includes an MPEG-TS streaming license that you can switch over to via the OLED menu display.

The transmitter has multicast capability in both 5 GHz and LAN modes, supporting up to four receivers simultaneously. Both the transmitter and receiver also feature mic inputs and headphone outputs allowing two-way communication. Both units also offer 1/4"-20 mounting threads on the bottom.

  • Transmits up 1080p60 for up to 2500 ft over the 5 GHz frequency
  • 70ms-80ms latency (approximately 2 frames)
  • 3G-SDI input and loop output / 3G-SDI output
  • Transmitter features a V-Mount plate on both sides
  • RJ45 ports supporting wired LAN transfer
  • RJ45 ports for bidirectional serial control
  • H.264 encoding
  • 30 Mbps bit rate over 5 GHz and 50 Mbps over LAN
  • RTSP and MPEG-TS streaming
  • OLED menu display
  • Mic and headphone connections allowing two way communication
  • Dedicated bidirectional IFB channel
  • Multicast capable, supporting up to 4 receivers